Needs new chips? Bally s6000

Darenmarcade

New member
Joined
Nov 26, 2017
Messages
8
Reaction score
0
Location
Missouri
I have a two times money bally s6000. The guy I purchased it from says it has error code 91ff. No big deal, should need battery. Get home plug in and no code. In fact, to display. I call him and ask what's up and he said he had a repair guy come out and put his chips in and that's when he snapped pic of code.

My question is, should I just buy new mains u28 u43? And should I buy leave ins?
 
Once you replace the battery you will need the reset roms. My S6000 had a similar issue when I bought it.. replacing the battery alone will not fix this.

First replace the battery boot up - should kick back an error 54<something> and then you have to power it off - pull the board, pull the 2 chips, put in the reset chips, put the board back in.. hold (2 buttons - its in the manual) and then power on.. this will force a board / rom reset - and put the machine back to a factory state.. once the reset completes.. pull the board out, switch the reset chips for the original roms and put it all back together.. it will go through a full cycle of test - and then be ready to play..

took a few times for me to get it right but its easy after you do it - about 20/30 minutes of work.
 
Back
Top Bottom