need vga pin out nanao 05t00905 26inch monitor

I'd rather see a pic of the chassis, so I can identify the Nanao model designator...
 
Here are some pictures.
Thanks Ed
 

Attachments

  • PB230750.jpg
    PB230750.jpg
    57.8 KB · Views: 57
  • PB230748.jpg
    PB230748.jpg
    61.5 KB · Views: 56
  • PB230747.JPG
    PB230747.JPG
    86.4 KB · Views: 52
Dont know from which side but from pin 1-6.

1 Red
2 Green
3 Blue
4 GND

This is where it gets iffy

5 or 6 is SYNC just dont know which.

Matt
 
That looks like one of the regular CGA/EGA chassis', so I don't know where you got VGA from. Looks like a standard MS8-26SU or similar.

if it's labeled C101 (or similar), then the pinout is:

1) red
2) green
3) blue
4) gnd
5) horizontal
6) vertical
 
Back
Top Bottom