Need to test a Tapper PCB

SuperBee4406

New member
Joined
Jan 6, 2009
Messages
2,399
Reaction score
10
Location
greenville, South Carolina
Trying to troubleshoot a Tapper and would to test the main PCB in another cab. Can I install the Tapper PCB into a Spy Hunter cab to see if it boots? I know the controls are different. I was thinking only hooking up power and video. On the MCR faq I see Spy Hunter and Tapper share the same MCR III pcbs.
 
I've always thought tapper/timber/DM/SH/Satans Hollow/etc were just rom swaps.. But I could be wrong. Check the pinout for tapper vs spy hunter.. Controls won't work, but you prolly get video and maybe sound.
 
the power + video are the same, the inputs are not, if you just want to see if the board boots you can do that.

i built an mcr to jamma adapter for my test bench, can't test everything but it makes it easy to check the board and unfold the stack out and work on it.
 
I've always thought tapper/timber/DM/SH/Satans Hollow/etc were just rom swaps.. But I could be wrong. Check the pinout for tapper vs spy hunter.. Controls won't work, but you prolly get video and maybe sound.

there are differences in the boards, and i/o inputs enough to make it non-ROM-swapable :(
 
Back
Top Bottom