need some help, in a tough spot

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
First i want to thank everyone who ordered cabinets from me in the last week, i have a ton to do! Here's the situation - i took in alot of orders, i paid all my bills i had laying here, (entire months worth was stacking up) and then i ordered material, and i ordered about double what i needed, so i would have stock on hand for additional orders.

I just recieved a PM from someone who had ordered two cabinets, and asked for refund due to a family emergency. Completely legitimate reason to ask, and i fully plan on refunding him, the problem is i stretched myself too thin with the wood order i just had delivered, and i do not have the funds to send back at this moment.

I haven't cut the cabinets that he ordered, so i'm not stuck with anything i have to try to sell, i just need to get two or three orders (depending on cabinets) to i can refund him his money and make this right. If anyone orders two of my 400.00 cabs, i'll knock 100 off, and i'll throw in a few arcade signs, and a double mario keyholder as well. Please send me a pm, and i appreciate the help, thanks, Brett

Here's my overloaded woodrack, i had to put 17 sheets leaning up against it, i had 85 on the rack itself.

MHspecialmolding006.jpg
 
Last edited:
Sorry I can't help right now, but damn if this isn't a guy trying to do right with the community. Keep up that communication and honesty and people here will support you forever. I know I won't hesitate to buy from you in the future. Good luck!
 
All Pm's replied to, BIG thanks to p1001 stepping up and purchasing my MH cab, i will be able to refund 1/2 today already. Working on a few smaller deals to get the rest back asap! thanks guys, i appreciate all the help! Brett
 
I need a blank Defender cp cut for my multiwilliams project
No button holes I have a drill press for that, just bare wood with the t-molding slot and angle cut.

Small enough to ship?
LMK
Mike
 
I need a blank Defender cp cut for my multiwilliams project
No button holes I have a drill press for that, just bare wood with the t-molding slot and angle cut.

Small enough to ship?
LMK
Mike

I'd be interested in one as well (but mine with holes). Can you do that?

- Mike
 
Brett,

Let me know about the Quantum specific cabinet parts. I do still want those and can pay as soon as we arrange something.

thanks
 
If anyone is going from the Minneapolis / St Paul area down to you again in the near future, I will order a cab.

Anyone going between here and there the next few weeks?
 
I totally think you should offer blank melamine wood control panels made to order.
The ones off the top of my head that I think could be easily cut.

Defender
Double Dragon

Any others guys?

I wouldn't mind ordering 2 double dragon ones.
 
Hey Guys! thanks so much for the help! I now have the money reimbursed, and all is good! I have tons of scrap melamine left from cabinets i made to make control panels. Are they 3/4 thick?? once i get caught up on cabinet orders (i have 20 to do!) i'll be glad to work on the smaller stuff! Joey, quantum parts you asked for, i'll get to them as soon as i can. i am rushing to get 4 cabs cut and off to paint, and 3 that have to leave for Chicago, and Bungy is waiting patiently on his Quantum, and i'm building that one along with the Chicago cabs.

My T-nuts i ordered last week just came it, and will be installed in the atari cabs that need them for the marquee brackets.

Thanks again guys, i appreciate it! Brett
 
Do you do custom work? I need a panel cut with an opening for star wars yoke. I do have the template.
 
Glad it all worked out. Now you've got me curious...what is a Double Mario?
 
Hey Guys! thanks so much for the help! I now have the money reimbursed, and all is good! I have tons of scrap melamine left from cabinets i made to make control panels. Are they 3/4 thick?? once i get caught up on cabinet orders (i have 20 to do!) i'll be glad to work on the smaller stuff! Joey, quantum parts you asked for, i'll get to them as soon as i can. i am rushing to get 4 cabs cut and off to paint, and 3 that have to leave for Chicago, and Bungy is waiting patiently on his Quantum, and i'm building that one along with the Chicago cabs.

My T-nuts i ordered last week just came it, and will be installed in the atari cabs that need them for the marquee brackets.

Thanks again guys, i appreciate it! Brett

Let me measure up one of my DD control panels so that you can replicate that. Ply would also work so that folks can install their own CPO.
 
Glad you got the orders you needed Brett. Was making me think about a couple more cabs, but that will wait for another time.

*** If anyone is thinking of getting a cab and needs it picked up in the Upstate NY area, I will be heading over to Brett in a couple months to pick up some cabinets. I will have room for more if someone needs something ****
 
Last edited:
Glad you got the orders you needed Brett. Was making me think about a couple more cabs, but that will wait for another time.

*** If anyone is thinking of getting a cab and needs it picked up in the Upstate NY area, I will be heading over to Brett in a couple months to pick up some cabinets. I will have room for more if someone needs something ****

can you swing by sacramento on the way?
 
*** If anyone is thinking of getting a cab and needs it picked up in the Upstate NY area, I will be heading over to Brett in a couple months to pick up some cabinets. I will have room for more if someone needs something ****

I might take you up on that. When are you going out? You're about 5 hours west of me. We plan on making a trip to Niagara Falls this summer and to the Strong Museum. Thanks
 
Sure, not a problem. I travel to Albany quite a bit, have to get Steve in Saratoga his Wacko machine that has been sitting in my shop.
 
Back
Top Bottom