Need robotron artwork measurements please

[Deadly]

I screwed up and didn't take artwork placement measurements before I sanded my cabinet down. I'm getting ready to apply stencils and I'm stuck without having some measurements to know where to place my artwork.

See attached picture.
Need measurement from bottom of cabinet up to lowest point of blue art
Need measurment from back edge to the artwork

Help is GREATLY appreciated

(Pic stolen from eBay heh)

 

[dahnz]

My one is 59.6 cm from bottom edge to bottom of lower blue chevrons and 3.3 cm from back edge to back edge of red stripe.

 

[Deadly]

Centimeters instead of inches - interesting. What part of the world are you from? Thanks for the info.

 

[dahnz]

New Zealand. You're lucky I didn't use picas and points (I work as an editor and typesetter). But I thought that centimetres would be more precise than inches.

 

[spacies]

I am in NZ too and have a Robotron.

Dahnz, are you in AKL?

Cheers.

 

[dahnz]

No, Wellington. My name's Dominic - we've actually emailed.

 

[D_Harris]

I screwed up and didn't take artwork placement measurements before I sanded my cabinet down. I'm getting ready to apply stencils and I'm stuck without having some measurements to know where to place my artwork.

See attached picture.
Need measurement from bottom of cabinet up to lowest point of blue art
Need measurment from back edge to the artwork

Help is GREATLY appreciated

(Pic stolen from eBay heh)

You only really need two measurements if your artwork is dimensionally correct.

My Robotron is sandwiched between another game and some other stuff, but for all it's worth The artwork begins 8 centimeters down from the top, and 3-1/2 centimeters in from the rear.

But remember that there was inconsistency from one cabinet to the next, so this can vary somewhat.

Darren Harris
Staten Island, New York.