NEW Need photos of Eliminator cocktail/ 4 player

komodo

Well-known member

Donor 2019, 2021
Joined
Apr 25, 2007
Messages
5,011
Reaction score
101
Location
Flower Mound, Texas
I can find plenty of exterior photos of the 4 player version of Eliminator. I was hoping to get some shots of the interior to get placement information on power supplies, boards, coin doors, coin counters etc. I'm having a run of reproduction harnesses made and also need to get good images of what connectors go where in the cabinet and how they are run in the cabinet itself. That should take about 30 minutes of opening up the cabinet and snapping about 30 or so digital images. If anyone has a dedicated or clean reproduction cabinet and can provide said photos, I would greatly appreciate them. So much so, that I would send them a $50 gift card of their choice (provided I can get one) or PayPal the funds to them instead.

If you are trapped inside due to the massive snowfall that is about to hit, then head on down to the basement or over to the gameroom and make yourself some cool cash to purchase some anti-freeze for your yourself. If you intend on doing so, just post a response here to prevent multiple sets of similar photos and disappointment to late comers to this thread. Heck, I may even entertain two sets of similar photos. The more the merrier. Just how many 4 player games are out there?
 
Used the camera instead of my phone, so hopefully they turned out alright. If you need more, or better clarification on any parts; let me know. Note on the coin doors: the cut wires are from when credit buttons were installed; before I swapped the roms to the freeplay version. Two wires are for the credit switch and the other two are for the lock coils; which I never had on mine. I also only ever had the one set of mechs per door; this is pretty much as I found the game. The only thing I did was replace the rom set to the freeplay version.

Pictures are uploaded here:
https://drive.google.com/open?id=1q8hj8II-DUmT7jlWRfDZ_4CStR1G4lRr
 
Here's what the original looks like laid out. The document I published has all these lengths in inches, so you can just follow those. And the harness I sent you matches all those dimensions.
 

Attachments

  • elim4p_harness.jpg
    elim4p_harness.jpg
    484.7 KB · Views: 21
Back
Top Bottom