Need Photo of Sega Enduro Racer control panel

MundoMan4

New member
Joined
Mar 20, 2007
Messages
700
Reaction score
0
Location
Pennsylvania
Hi
If anyone has an Enduro Racer, I could use a picture of the Steering POT (volume control) on the control panel. I have two control panels and they both have the steering POT removed. I have a replacement POT but need to know how the wires connect.
The wires are Red Blue and Black, just not sure which order they go, and the schematic does not show colors.

Thanks in Advance!
 
Doesn't anyone have a Sega Enduro Racer, or a Control panel?

I only need to connect the steering "Volume control" (potentiometer) to have this working and just need a picture of where the wires go.
Or maybe someone that knows schematics better than me can figure it out by what wire connect at the molex connectors...

Thanks
 
Hi
If anyone has an Enduro Racer, I could use a picture of the Steering POT (volume control) on the control panel. I have two control panels and they both have the steering POT removed. I have a replacement POT but need to know how the wires connect.
The wires are Red Blue and Black, just not sure which order they go, and the schematic does not show colors.

Thanks in Advance!

Can you trace the wires back to the board to match them up to the schematic? That will tell you how to connect it to the pot.
 
Can you trace the wires back to the board to match them up to the schematic? That will tell you how to connect it to the pot.

I'm not that good. I'll post the schematics incase someone else can. (also the scematics just have the POT labeled 1 2 & 3 (didn't see any numbers on the pot)

Thought a picture would solve the question real fast.
 
Hi.

Many years ago, my father and I attended an arcade game auction. The first item that was up for bids was Enduro Racer. It wasn't in very good shape, but, it did/does work. We purchased it for $10...! :lol:

It's actually still in my parents garage. I don't live with them any longer. However, the next time I visit them, I could prolly snap some pictures. But, I have never taken apart the unit before. So, I'll need to know what I'm looking for. If you could describe what you're after, I'd hope I could help.
 
Hi.

Many years ago, my father and I attended an arcade game auction. The first item that was up for bids was Enduro Racer. It wasn't in very good shape, but, it did/does work. We purchased it for $10...! :lol:

It's actually still in my parents garage. I don't live with them any longer. However, the next time I visit them, I could prolly snap some pictures. But, I have never taken apart the unit before. So, I'll need to know what I'm looking for. If you could describe what you're after, I'd hope I could help.

That would be great.
Its under the control panel, think there are two allen wrench bolts to swing the controls down.
The POT is the electrical devise that is turned when you rotate the handles, it has three wires on it. There are three or 4 POTs I believe.. One moves when you pull up on the controls, one for twisting the accelerator, one for the brake, and finally one when you turn the handles right and left.
I just need a picture of the three wires on the POT when you turn left and right..

If you need more info let me know.
 
Back
Top Bottom