Need new flyback, Not sure what verion Neotec I have

Mario64

Member
Joined
Aug 1, 2016
Messages
344
Reaction score
22
Location
Texas
Need new flyback, Not sure what verion Neotec I have

So the monitor on my Rush machine has these symptoms, and Im hoping that it is not on its last leg and hopefully a new flyback will fix it.

When powered up from cold start it usually takes about 10-15 minutes for the image to appear.

Once the image is visible, I have to readjust it every time to get a good focus and brightness.

Then while its playable the screen will dim and brighten on its own like a flicker.

Finally, after about 1 hour of being on it will go completely out of focus and can not be adjusted.

So I know I need a flyback for Neotec 27inch but when I search, 2 products show up a
http://www.twistedquarter.com/index.php?main_page=index&cPath=206_209

Im not sure the difference and which one I need.
 

Attachments

  • IMG_0669.jpg
    IMG_0669.jpg
    192.2 KB · Views: 10
  • IMG_0670.jpg
    IMG_0670.jpg
    208.6 KB · Views: 10
Last edited:
i would post a picture of the chassis. does the flyback on the chassis have a sticker with a number on it. i have most of the neotec flybacks but they won't be in stock for about 4 weeks. i have always done cap kits also because i have never been impressed with the caps on them and i have the best quality caps in my kits if you need.
 
i would post a picture of the chassis. does the flyback on the chassis have a sticker with a number on it. i have most of the neotec flybacks but they won't be in stock for about 4 weeks. i have always done cap kits also because i have never been impressed with the caps on them and i have the best quality caps in my kits if you need.

Is this the one you are referring to?
 

Attachments

  • IMG_0594.jpg
    IMG_0594.jpg
    193.2 KB · Views: 26
Is this the one you are referring to?

that is the chassis model which if i recall correctly its part of the 2701 family of neotecs.

the number should be on a sticker located right on the flyback transformer.
 
that is a flyback failure condition.

the tube could be shot too, as it's a later model Zenith. Neotecs will also give off the illusion that the tube is bad, when in reality they need new caps. had a pair of Rush 2049s at a location, one looked significantly shittier than the other. I put my rejuvenator on it and all the levels were strong. I wound up getting relieved of my duties before I was ever able to cap it.

never heard of a 27ER. the 2xE models are the medium resolution ones. I don't know the differences to the 2701, the 01 signifies medium resolution there as well. I need to learn Neotecs eventually.
 
The 27e is similar to the 2701 but there are a few differences in cap values. I know becuase I bought 2701 cap kits before I took a good look and found I was repairing a 27e...

And the other fellas are right, get a flyback bud. I would cap it also, and don't miss the bipolar caps on the little pincushion board on the side. That will prevent some inevitable problems with width and geometry from popping up.
 
Updated with chassis pics. Also what's the best way to clean this filth?
 
Simple green and sink water. Let the thing dry for a few days after dont use much pressure when washing. Remember electronic components should be sealed and water won't hurt them when they're not plugged in.
 
Simple green and sink water. Let the thing dry for a few days after dont use much pressure when washing. Remember electronic components should be sealed and water won't hurt them when they're not plugged in.

yup awesome to clean them and i even use a dishwasher most of the time (under specific conditions).
 
yup awesome to clean them and i even use a dishwasher most of the time (under specific conditions).

If it's his first time better not get too crazy, the sink method works just takes more time. Dishwashers are for the masters :)
 
If it's his first time better not get too crazy, the sink method works just takes more time. Dishwashers are for the masters :)

i love the dishwasher (i can do 8 chassis at one time)...:D

BTW: i don't use the same dishwasher for my dishes i eat from..:eek:
 
Ok, thanks guys wil do the simple green and faucet water method. But can anyone confirm which capkit and fly back I need?
 
Ok, thanks guys wil do the simple green and faucet water method. But can anyone confirm which capkit and fly back I need?

it should be the neotec nt-2700 family cap kit. i do stock them if you need. the flybacks i won't have back in stock for about another week and i will have to verify but i am pretty sure it should take the MRCFT-252.
 
it should be the neotec nt-2700 family cap kit. i do stock them if you need. the flybacks i won't have back in stock for about another week and i will have to verify but i am pretty sure it should take the MRCFT-252.

Ok, well could you pm me when you get them back in and I will order caps and flyback together. Thanks.
 
Back
Top Bottom