Need info on adding the 15 Flashers to Rollergames Early/Proto games

oldschool77

Member
Joined
Jan 13, 2015
Messages
315
Reaction score
10
Location
Virginia
Need info on adding the 15 Flashers to Rollergames Early/Proto games

I'm at work and Pinside is blocked here. Can someone please copy and paste the info (if you have it) on the wiring for adding the missing 15 flashers to Rollergames early/proto games? My back box is already drilled for the sockets, and I located all the new proper interconnect resistors and sockets, and have an idea how to add them, but I don't wanna BS it. So I wanted to do more research to see what else I need before I put in my order later today for parts.

Thanks!
 
For anyone whom is curious, I got this figured out. Basically you add to the 17 flashers (15 in the back box, and two new ones in the PF) according to the pics on the link below. Then tap into the coordinating pin on the existing unpopulated (except for pin 6) plug at J11 on the interconnect board for the respective flasher circuit. Then replace the cement resistors for those affected circuits on the interconnect to reflect the new load (lol, I said load).


Once I saw the pictures it all made sense.

Gonna do this this weekend!! Message me if you have any questions. This was frustrating, but fun to figure out!

http://s487.photobucket.com/user/kb.../Light_insert_board_solenoid_numbers.jpg.html
 
Last edited:
Back
Top Bottom