Museum of the Game® & International Arcade Museum® Forums

I am mainly looking for info on the Status 1 led flash codes but read a lot tonight and may post some other useful info in this thread as well. These are likely applicable to Green boards as well.

In several of the manuals (Carnival King, Buck Hunter, Golden Tee Fore) it says "Run the power-up test by holding the START button during power-up. Watch for LED Status 1 and a flash code." but none of them list what the status codes are.

I have a red board (BBH2) that flashed 7 solid on 8, I believe it is ram.
I removed the graphics card and it flashed 2 solid on 3. Interesting.

I think @ToplessZ @DarrenA @ed12 @LyonsArcade had some of the most useful info on these and the green boards
Also found this crumb of info.
I have this now. contacted Incred Tech support.
it blinks 6 times and solid on 7 - but 6 and seven mean Ram failure

I'm going to attempt to transfer the ram from a second board... who knows if that will work - and my SMT experience (and toolset) is non-existent
Back
Top Bottom