this machine wouldnt start a game up when powered, it was stuck in audit mode and i could never get it out.I bought another reconditioned board and it did the same thing, the only difference is it didnt have a battery holder. so i put on a remote battery holder and it had problems with one of the chips. So i then soldered that battery holder onto my existing board and now i can play the game, the only issue i still have is when in audit mode i cannot change settings well. for an example, if i want to change the multiball timer from 35 secs to 99 i press and hold the start button and it might go up to 38 and sit there, if i try to go down it might skip to 23 secs and sit there. I dont have smooth control over this . What should i be looking for as far as a test or changing a component on my board ?
