Need help with gti club hardware

LOLAS

New member
Joined
Aug 30, 2009
Messages
38
Reaction score
0
Location
DHERYNIA, none, Cyprus
I have a KONAMI GTI CLUB PCB with a restart problem.First time that i power it up it pass the test and is ok.If i turn it off and on again i have ic 18K,13K,11M,10M,7N bad and restart all the time.Please help if you can.
thanks
 
i need help with gti club pcb

I have a KONAMI GTI CLUB PCB with a restart problem.First time that i power it up it pass the test and is ok.If i turn it off and on again i have ic 18K,13K,11M,10M,7N bad and restart all the time.Please help if you can.
thanks
I have replace ic 18k,13k,11m,10m until now .Didn't work .
I have another one with the same problem but this one always restart,never pass the test.
 
Last edited:
Check your voltage on your power supply . Sometimes it can cause wacky things.I know my golden tee s real sensitive ,if the power is off a little it will reset.Just a thought
 
i need help with gti club pcb

I have replace ic 18k,13k,11m,10m until now .Didn't work .
I have another one with the same problem but this one always restart,never pass the test.

I have turn it on while holding down the test button on the board but didn't fix it.Because in the morning when i turn it on pass the test only 1 time i start to think about capacitors.
I have replace all the capacitors on the output Voltage on PQ30RV11,PQ7RV4 V.Rec.It start to be better now.It pass the test more times now.Now i have Check the voltage on the pcb and i put it 5V.Pass the test many times but sometimes bad ic 18K,13K,11M,10M,7N.I have put the voltage 4.9V.Until now is Ok pass the test .I will test it again many times to see if is OK.
 
Back
Top Bottom