Need help Rowe R-93 wiring to Pioneer PD-M400

woodsy169

Member
Joined
Nov 29, 2009
Messages
198
Reaction score
1
Location
Ada, Oklahoma
Greetings all, I picked up a Rowe R-93 Combo that was missing the CD player. All of the wiring and CD attenuator are there, so I bought a Pioneer PD-M400 off of eBay. I need help with where the wires need to be soldered on the PCB of the CD player. Anyone have a similar disc changer that can send pics of the CD player PCB or point me in the right direction? Thanks!!
 
jukebox

hi i have 12 or so jukeboxes at the shop i probably have one. there is a peice that plugs into where the rca jacks go to. give me email i will try and get you the picture. let me know if you ever need parts i have lots of them
 
hi i have 12 or so jukeboxes at the shop i probably have one. there is a peice that plugs into where the rca jacks go to. give me email i will try and get you the picture. let me know if you ever need parts i have lots of them

Hi, that board that plugs into the RCA jacks is the CD attenuator (I have this part) I just need to know where the 4 wires go to inside of the CD player on the CD player PCB. I have seen a few posts that say some locations, but none are for the PD-400 (which the R93s came with)

Email address is [email protected] Thanks!!
 
here are some pics of the extra ones I have. From my Rowe R-93, Pioneer PD-M6
 

Attachments

  • SANY1647.jpg
    SANY1647.jpg
    101.7 KB · Views: 18
  • SANY1646.jpg
    SANY1646.jpg
    100.7 KB · Views: 17
  • SANY1645.jpg
    SANY1645.jpg
    101.6 KB · Views: 17
Back
Top Bottom