need help hooking up WG V1001 (SID) neck ring to tube

mecha

Well-known member
Joined
Apr 19, 2007
Messages
24,332
Reaction score
7,037
Location
MKE, Wisconsin
need help hooking up WG V1001 (SID) neck ring to tube

I acquired a Space Invaders Deluxe last September, haven't gotten around to tinkering with it yet. the previous owner insisted that when it worked it was a very narrow line, so I'm thinking it's got vertical collapse and just needs a cap kit, unless someone out there urges otherwise.

when I got it however the neck ring wasn't attached to the tube, and I'm uncertain of its orientation, I guess it's easy to hook these up 90 degrees rotated and get all kinds of weird shit on the screen :) so I really need to know which colored wire is supposed to go where.

I haven't looked inside this machine since like a week before my wedding last month, I just brought it in for cleaning, and haven't touched it, so I have no familiarity with it at all.

from what I read trying to search for the neck ring orientation it appears that a lot of stuff can fail on these, this is my first B&W experience, so be gentle. thanks
 
images


.
.
.
 
There are usually colored dots next to the connectors on the yolk that corresponded to the wire colors. Does your yolk have them?
 
B&W 22VATP4 Tubes w/Yokes

Attached photo of B&W Tubes 22" with yokes.
 
Last edited:
Back
Top Bottom