Need help finding a capacitor

ArcadeGreg

Permanently Banned
Joined
Oct 5, 2010
Messages
1,534
Reaction score
19
Location
Texas
I am working on a WGK4900. It has a defective capacitor (C505). It is a 560uf 200v radial cap. It is much larger than all of the other capacitors, and it has four legs. The part number on the cap is CE69W-A and a manufacturers name of Marcon. I looked on Bob Roberts, but I am not sure which one is the right capacitor (I think it is the "560uf200v B+ filter" on Bobs site, but wanted to make 100% sure with you guys that it is the right capacitor. Any expert knowledge will do for me.
Thanks guys,
Greg
 
bob is a pretty good resource to ask these questions to as well. :)


[email protected]

Don't you know God has more important things to do, than to answer my stupid questions...lol, j/k.

I've been searching some old posts and I think my suspicious we're correct. I think it's the filter capacitor for the board, and bobs "560uf200v B+ filter" listing might be a go.
 
I am working on a WGK4900. It has a defective capacitor (C505). It is a 560uf 200v radial cap.

I think it is the "560uf200v B+ filter" on Bobs site,


That's the proper cap. It will probably be a bit smaller (most modern caps are)....and it will only have two legs. Your four legged cap will have one leg for positive.....the other three will be tied to ground. Just make sure you install the new two leg cap with the "+" leg to positive, and the negative leg to the ground position.

Edward
 
That's the proper cap. It will probably be a bit smaller (most modern caps are)....and it will only have two legs. Your four legged cap will have one leg for positive.....the other three will be tied to ground. Just make sure you install the new two leg cap with the "+" leg to positive, and the negative leg to the ground position.

Edward

Ed,
Thanks again for your help. I will place the order and install it just as you recommended. Keep up the good work and merry Christmas.
Greg
 
Back
Top Bottom