Need: Galaxian Plywood Monitor Mount

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Rating - 100%
114   0   0
Or if someone can use theirs as a template and trace it onto drawing paper, cardboard or newsprint and mail that to me maybe? I am not afraid of making my own, but I need a decent factory pattern to work from. Thanks!
 
FYI – I've sold the machine, but if I recall correctly, there is a metal bracket attached to the mounting board.
 
They are next to impossible to remove without breaking them. Midway used those stupid square bladed fasteners which always jack up the wood when removed. What about using the metal reails from a mspac/galaga etc?..or ya trying to be original?
 
I have some of these I made up a while back. Exact duplicate of originals.

Possible to sell and ship one to me? I have the metal brackets in there now, but it is obviously not original. The monitor sits way too far back in the machine. I tried to make it work, but I'd have to cut off one of the mounting flanges of the hor monitor frame, as it runs into that piece of fiberboard between the cab's interior and the coin bucket area and prevents it from sitting where it should.
 
Really? All you had to do is ask. Don't be shy. If you don't have something by next week I will take measurements of mine and draw you something.
 
Really? All you had to do is ask. Don't be shy. If you don't have something by next week I will take measurements of mine and draw you something.

A thousand pardons little master. I did not want to trouble you with something so trivial. I will ping you if Rip can't/won't sell me one.
 
Back
Top Bottom