Need a yoke measurement...

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
25" U2000

If you can give me a label number, too, that would be great.

Thanks...
 
I have one working at the moment..

Tell me exactly what to do (don't assume that I know anything!).

My buddy that lives 5 minutes away has one of these that I just fixed for him. I can ask him to get some measurements for you, but you'll need to be more specific because I ain't real smart like.

Really, like specifically what to measure, etc. and I'll do my best to get it to you. Unless someone else replies... but it looks like 19 people viewed this and nobody replied and you are always helping people on here, so I'll do what I can!

~Wooo
 
Unplug the red/blue yoke connector and measure the ohms between the red and blue, then plug it back in. H = ?

Then unplug the green/yellow yoke connector and measure the ohms between the green and yellow, then plug it back in. V = ?

And if you see and labels on the side of the yoke, write down those numbers.

Thanks....
 
I've found the label should say 009A2988-001. I'm going to check my boxes, but would still like a measurement...
 
Apparently the U2000, U5000, and K7400 all use the same yoke, so I may be okay, as I have a few U5000's lying around...
 
I'm checking tonight too

I couldn't get to it last night (the game isn't at my house) but was going to check it tonight too. Hey, the more the merrier!!
 
I brought home a monitor with the proper yoke, so I'm set. Thanks anyway.

I'll post the readings here later so they'll be on record somewhere...
 
Back
Top Bottom