Need a Q201, Q202 or Q203 transistor....Anyone?

Pengo13

Well-known member
Joined
Nov 12, 2008
Messages
4,983
Reaction score
92
Location
New York
Rating - 100%
585   0   0
This transistor is for a k7000 series neckboard for a 25" tube. This transistor has the weird T Z 1034 114 stamped on it. I need this urgently.

Please PM me if you have some available. I'm sure that someone has a trashed chassis or neckboard laying around. It has to have those #s stamped on it. Unfortunately, the 2SC2068 transistors are not compatible.
 
neck board

I will look for neck boards and compare but first if they are wrong only because of the leg position can you not just twist the legs into the right spot or even solder some wires to them and solder wire into the right spot?
 
Hi, I don't know if soldering a wire will work. I can certainly try. Please let me know what you find in your search through the neck boards. The middle leg is the one that broke off. Thanks
 
transistors

If their is enough room to get solder on then the wire will work. If not enough, use a exacto knife and pick away at it a little, until you get enough.
 
Back
Top Bottom