Need a photo of a Mario Bros harness

NotreCaine

Active member
Joined
Apr 18, 2008
Messages
1,964
Reaction score
14
Location
Lake Effect Snow,, New York
Looking to get a close photo of a MB WB harness. More specific: I need a pic of the 44 pin green edge connector and possibly the black 10 pin connector, that goes to the power supply.

I'm building a harness for my machine and I'm having issues with the wires that lead to the 10 pin, on the power supply. I'm getting jarbled graphics and the characters are sprites and oblong in appearance. Thanks to anyone who can help.

Photos can be sent here or to my email addy:

[email protected]
 
To be more clear: I need to know what wires are soldered to the 44 pin. The number 6 slot on the 44 pin, looks to have 4 wires going to it, based on the schematic. These feed into the 10 pin connector, for the power supply. The other wires I've already completed and seem to be ok. When I plug the 9 pin in, the game comes on and I see the credits, the 1983 Nintendo copyright, but no characters seen or the Mario Bros attract screen. When I plug both in ( 9 and 10 ), I get mixed up jarbled Mario Bros screen and the two characters are screwed up, as mentioned before.
 
If taking a photo is too much work (=>), any Mario Bros WB owner can tell me what is soldered to what on the 44 pin, that pertains to the black 10 pin connector, for the power supply. Thanks to all in advance.
 
I found a few before the restore.

002-1.jpg


003-1.jpg


002.jpg
 
Re:

Was there two different marquees for the MB? Mine does not have that two player feature icon. Does anyone know how many wide body cabinets they made? My MB serial is 02576...
 
Back
Top Bottom