Need a little help with my DK control panel.

Madaracs

Well-known member
Joined
May 25, 2005
Messages
2,351
Reaction score
41
Location
Golden Valley, Minnesota
My original DK was converted to a Street Heat and I'm just getting to putting everything back together now that it's been painted. The problem is they hacked the old wiriing to put in the steering wheel and a few extra buttons.

I've looked around online and can't find a picture of the bottom of the control panel for Donkey Kong to see how it's wired up.

I've got a few questions:

Would some be so kind as to snap a photo of the underside of their control panel and share it?

Or, is there an online resource I'm missing for the wiring?

Are the original P1, P2 and Jump buttons on a DK CP leaf or micro? I'm guessing leaf but I would just like confirmation.


Thanks for the help, gang.
 
Here is one I had.
The harness is not original but the buttons,holders and wire routing are.
The buttons are leaf type but the adjustable holders have micro switches.
attachment.php
 

Attachments

  • DKcontrol panel 002.jpg
    DKcontrol panel 002.jpg
    55.5 KB · Views: 41
Here is one I had.
The harness is not original but the buttons,holders and wire routing are.
The buttons are leaf type but the adjustable holders have micro switches.
attachment.php


Hey thanks for that. It's very nice. I ended up reading a manual... though it wasn't for the boardset I have so I don't know that it was a total help.

The other problem I have is that this is a reproduction CP from Mike'sArcade and so I think the microswitches themselves are a bit different.

In any case, I've got the directions, jump, P1 and P2 buttons working.

Thanks all.
 
Back
Top Bottom