Need a little help from any Time Pilot owners

Guru-420

Well-known member
Joined
Nov 8, 2006
Messages
2,566
Reaction score
59
Location
Hubertus, Wisconsin
I recently purchased a Time Pilot upright, something I've actually been after for a little while now. Unfortunately, mine came without the glass, cardboard art and shroud. I made a quick shroud using black poster board, and found a cleaned up version of the cardboard art that I had printed at work. Now, I'd like to stop after work to pick up a piece of Lexan cut-to-size, but do not have the measurements handy. Is there anyone that might be able to measure their glass bezel for me to save me a trip and a day (they close by the time I would get home to estimate the size)?

Also, should I get the lexan in 1/4" or is 1/8th inch ok? (Not being routed)
 

Attachments

  • 20160926_174324.jpg
    20160926_174324.jpg
    200.2 KB · Views: 32
  • 20160927_201147.jpg
    20160927_201147.jpg
    195 KB · Views: 35
I have mine at work. I will be back in my office about 11:00 PST. If someone doesnt post by then, I will measure it out for you.

Tom
 
Hey Gar, I have one and I just measured it out to 22-11/16" x 23-5/8". Maybe if Tombo measures his also that can confirm this is correct. The first measurement is the length, so there can be some leeway there as it goes into the channel up top and falls under the CP. Oh, and it's 3/16" thick...so 1/8 would work if that's all you can find. Mine is lightly tinted also, and pretty sure it's original.
 
Last edited:
Hey Gar, I have one and I just measured it out to 22-11/16" x 23-5/8"...... Oh, and it's 3/16" thick...so 1/8 would work if that's all you can find. Mine is lightly tinted also, and pretty sure it's original.

Worked out perfectly, totally happy with the results. I wound up getting a clear sheet of 1/8" Lexan cut to size while I waited ($18). Had the print shop at work do a print on cardstock of the MAME scan for the bezel (free), and reproduced the missing black monitor shroud out of black posterboard ($.89). For under $20, I can live with the results.

I bought the machine Monday evening and it was missing everything listed above.

Edit: Sorry for the sideways pic.
 

Attachments

  • 20160928_200023.jpg
    20160928_200023.jpg
    197.7 KB · Views: 29
Ugh. I apologize for the delay. I ended up having to report in for Jury duty. I am in the office now.

Yes, tinted plexi
I get 23 3/4 wide
I cannot measure the height as the damn coin door is locked and I dont have my keys here...

-_-


Tom
 
Last edited:
Ugh. I apologize for the delay. I ended up having to report in for Jury duty. I am in the office now.

Yes, tinted plexi
I get 23 3/4 wide
I cannot measure the height as the damn coin door is locked and I dont have my keys here...

-_-


Tom

No sweat, Ranchdrsn was kind enough to get the measurements in time for me. The height measurement was the one I was having the most issues with and wanted to make sure since my machine did not come with anything protecting the monitor.
 
Back
Top Bottom