need a kaga flyback

pinnut

Active member
Joined
Aug 3, 2010
Messages
1,084
Reaction score
20
Location
New York
i have an astro fighter with a 13 inch monitor, i believe its a kaga chassis. the flyback is shot. its not mounted on the board, as seen in the pic attached, its stand alone. any where i can find a working one, or replacement?

thanks
 

Attachments

  • 20170123_120009.jpg
    20170123_120009.jpg
    208.9 KB · Views: 17
not sure how to ID it. it a main board with the horz transistor, a smaller board with a fuze and the vert transistor, and the stand alone flyback.

thanks
 
not sure how to ID it. it a main board with the horz transistor, a smaller board with a fuze and the vert transistor, and the stand alone flyback.

thanks

post some pictures of the chassis and also clean off the sticker on the flyback and see what all the numbers on it are and post them.
 
there is a sticker with a number on the board. the sticker on the flyback is burned from the arcing, its as clean as i can get it. anymore would remove the number . hope these pics help.
 

Attachments

  • 20170123_154011.jpg
    20170123_154011.jpg
    196.7 KB · Views: 11
  • 20170123_154354.jpg
    20170123_154354.jpg
    224.5 KB · Views: 13
  • 20170123_154410.jpg
    20170123_154410.jpg
    205.4 KB · Views: 11
  • 20170123_154505.jpg
    20170123_154505.jpg
    225.6 KB · Views: 11
being the middle digit on the flyback was illegible, i googled the number changing the missing digit from 1-9 every time. the number msh-d548 came up as a kaga flyback so im thinking thats a correct number. it also appears to be for a 14 inch monitor. i could try a universal chassis if one is available for the tube, but its a very tight cocktail unit and not a lot of room to improvise.

thanks much
 
Back
Top Bottom