Nebraska Pinball repair

gsealock

Well-known member
Joined
Mar 9, 2010
Messages
2,645
Reaction score
425
Location
Columbus, Nebraska
I know of one place in Omaha, pinball past, but I heard there is a guy in Oakland, NE that does pinball repairs as well. Is he a Klover? Anyone know his name/ how to contact him?

Thanks,

Greg
 
Rob Anthony will be around the NE area in the next day or two. He is bringing me a board and working on an issue I have not been able to fix Friday in Lincoln.

Contact him quick. I am sure many other KLOVz will back him. Dude rocks conventions and does repair trips across the US.

http://lockwhenlit.com/default.aspx

[email protected]

I am almost certain the Oakland guy you speak of is the same guy who told me about Rob Anthony.
 
Last edited:
I went to a guy in millard at pinball past and was not happy with the work that he did on my board. I ended up dropping my board off to stangbat a fellow klover. I would highly recommend you reach out to him if its something board related that you can ship. Hes located in Kansas.
 
Rob does a great job and is very good with repairs. With regard to me I am able to do full shop jobs, repair, and board repairs on most boards. I an good at it but not interested at doing too many. I don't want to make it a job :)

Just want to help out area collectors
 
Rob rocked. I sent my helmet chase lamp board to him Monday and he was able to test it on another BOP before bringing it over. Ran into some issue and after bringing in some other issues into the whole picture it started to make sense. Another guy I had work on BOP a year or so back made a little goof. Fixed some stuff on the driver board and now BOP is working 100%

The issue on my WCS was one I could of fixed with a bit of work, but since he was at my place I let him handle it. I did not realize how much of the rear GI was missing till it got fixed. It looks great.

Thanks for the tip on Rob Greg. Super quality work at a fair price. Money well spent.
 
Back
Top Bottom