NBA Jam wiring harness

Joined
Jan 27, 2017
Messages
44
Reaction score
19
Location
Ontario, Canada
Hi, I am in the middle of converting an old NBA Jam from Golden Tee, back to NBA Jam (The operator in town was a GT converting fiend)

I just noticed and learned about wiring harnesses, or rather, my machines lack of... I have the 4 players from the board to the control panel, but nothing past those 12pin quick disconnecters. I am building the control panel myself... what do I do?

Is there a list of compatible wiring harness games? Can i just build my own? I'm open to suggestions. I'm not looking to sink more cash/time into this project, but that seems inevitable!

Any help would be appreciated.

George
 
You can for sure build your own. You'll need a molex crimper and pins to make the connector, but everything else you can just solder to the cherry switches. Alternatively, a 3 on 3 ice hockey should be identical. A NBA hangtime might be as well, but I can't say for certain.
 
Save yourself the trouble and use quick disconnects.

Instead of soldering. If you are concerned about the connection, you can always solder after you crimp the connection. I do this.
 
Back
Top Bottom