MMAO - Game: nba hangtime pcb

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,144
Reaction score
2,593
Location
Eureka, California
Rating - 100%
383   0   0
SOLD

got this from paulolson a few months back and I have downsized the cabs and don't think I will end up using it.

I have just tested it in a jamma cab of mine but it doesn't have the -5 connected, not sure if it needs it. I wasn't getting any sounds, but the game played fine. (with a joystick and 2 buttons) I didn't see any errors on the boot up screen.

it has a 3 and 4 player harness connected to the pcb as well
 

Attachments

  • 001.jpg
    001.jpg
    89.8 KB · Views: 3
  • 004.jpg
    004.jpg
    89.6 KB · Views: 4
  • 005.jpg
    005.jpg
    93.5 KB · Views: 3
  • 010.jpg
    010.jpg
    102.2 KB · Views: 6
  • 011.jpg
    011.jpg
    100.9 KB · Views: 5
Last edited:
what are you looking to get for this? also any way you can get -5 hooked up as these boards sometimes have issues after a warm up with sound.
 
what are you looking to get for this? also any way you can get -5 hooked up as these boards sometimes have issues after a warm up with sound.

Well let's say $65 shipped as-is. It will ship by wednesday pending a sale of some type. This board may be too big to fit in a flat rate box and be packed to my standards so it may end up going parcel post.

I have 20 things more important than trying to figure out how to insert a pin into an existing harness. (truly nothing personal)


SOLD
 
Last edited:
Name them. We have rights to know the 20 more important things!

1. make a list of important things for inquiring minds who want to know
2. install more components on a g07 I'm working on
3. work on another g07 that is almost perfect
4. transfer my tube swap tv turned g07 into an actual g07 frame
5. silicone the yoke into position on above mentioned tube swap
6. clean up work bench
7. work on mcr power supply board that I've currently spend 40 hours on and it still doesn't work.
8. fix the plexi on my great swordsman
9. dial in the picture on my gravitar
10.finish up the issue with my major havoc
11. get my asteroids control panel sanded down and ready for a cheap ass cpo to be applied
12-20. beat off 9 times.

board is sold
 
Last edited:
1. make a list of important things for inquiring minds who want to know
2. install more components on a g07 I'm working on
3. work on another g07 that is almost perfect
4. transfer my tube swap tv turned g07 into an actual g07 frame
5. silicone the yoke into position on above mentioned tube swap
6. clean up work bench
7. work on mcr power supply board that I've currently spend 40 hours on and it still doesn't work.
8. fix the plexi on my great swordsman
9. dial in the picture on my gravitar
10.finish up the issue with my major havoc
11. get my asteroids control panel sanded down and ready for a cheap ass cpo to be applied
12-20. beat off 9 times.

Hahahhahhahha! The best list of 2012.
That deserves a bump.
 
Back
Top Bottom