metahugh
Active member
Game Pictures:
https://picasaweb.google.com/metahugh76/NBAFBForSale
This game has been completely refurbished and overhauled. I spend a lot of time on my games and this one is in nice shape overall. The game was stripped down, the interior of the cabinet was sanded and the sides repainted black for a fresh, clean look. The original serial number and other stickers were reused. The bottom of the cabinet was also freshened up. The metal parts were tumbled. The lockdown bar receiver was refinished and new decals installed. The defender gearbox was stripped down, cleaned up, re-greased with Super Lube Synthetic grease and reassembled. The playfield is in near perfect condition with and many new parts were installed including:
Coin Door
Playfield Glass
Translite Glass
Rubber
Pop Bumper Skirts
Pop Bumper Lamp Sockets
Coil Sleeves
Bulbs where needed
Flipper Bats
Flipper Coils
Flipper Buttons
Flipper Button Opto Interrupters
Flipper Bushings
Complete Flipper Rebuild Kit
Center Ramp
Backbox Plastics
Backbox Ball
Backbox Lock
Cliffy Colored Post Sleeves in orange and purple
Defender plastic
Back panel "Crowd" plastic at the back of the playfield
Power Cord
Plastic tubing for power cord and backbox ground strap
The CPU board has a new battery holder installed. The driver board has all new capacitors installed. The game comes with a set of pinball Pincab leg protectors. I created a set of apron cards that are installed (See Pictures).
I am asking $1850.
Thanks,
Hugh
metahugh at yahoo dot com
https://picasaweb.google.com/metahugh76/NBAFBForSale
This game has been completely refurbished and overhauled. I spend a lot of time on my games and this one is in nice shape overall. The game was stripped down, the interior of the cabinet was sanded and the sides repainted black for a fresh, clean look. The original serial number and other stickers were reused. The bottom of the cabinet was also freshened up. The metal parts were tumbled. The lockdown bar receiver was refinished and new decals installed. The defender gearbox was stripped down, cleaned up, re-greased with Super Lube Synthetic grease and reassembled. The playfield is in near perfect condition with and many new parts were installed including:
Coin Door
Playfield Glass
Translite Glass
Rubber
Pop Bumper Skirts
Pop Bumper Lamp Sockets
Coil Sleeves
Bulbs where needed
Flipper Bats
Flipper Coils
Flipper Buttons
Flipper Button Opto Interrupters
Flipper Bushings
Complete Flipper Rebuild Kit
Center Ramp
Backbox Plastics
Backbox Ball
Backbox Lock
Cliffy Colored Post Sleeves in orange and purple
Defender plastic
Back panel "Crowd" plastic at the back of the playfield
Power Cord
Plastic tubing for power cord and backbox ground strap
The CPU board has a new battery holder installed. The driver board has all new capacitors installed. The game comes with a set of pinball Pincab leg protectors. I created a set of apron cards that are installed (See Pictures).
I am asking $1850.
Thanks,
Hugh
metahugh at yahoo dot com