NASCAR draining problem has any one had this issue

kuglerarcade

New member
Joined
Oct 13, 2007
Messages
780
Reaction score
3
Location
medina, Ohio
when the ball goes in the garage and then pop out 9 out of 10 times goes right down the middle.any one no of any fixes for this
 
The Dale Jr I played at a restaurant last week did the exact same thing.
 
i played a Nascar pin for the first time weekend before last at the manitou arcade. it had exactly the same problem. i played only one game because it was so frustrating.
 
I had the same problem playing nascar at an arcade and found I had to shake the machine as it came out to save it. Bleh
 
nastycar

yes, mine did that as well, i tried puting foam in the scoop to redirect, it tried mounting teh assmembly under the playfield on a bit of a slant. NOTHING helped.
if u make your machine unlevel it will work, but then the gaem is...well...unlevel.

that is the reason i sold mine.

sure, if ur tilt is ultra loose you can slide the machine or bump the hell out of it, but thats not pinball to me.
pinball needs a tight tilt to prevent extreme nudging.
 
I ended up putting a piece of foam on the left side inside the scoop hole. Also slightly loosen the screws on the front part of the scoop assembly under the playfield. It shoots it to the right flipper every time now.
 
My Pinbot does this. It pisses my wife off so bad. I don't think she has played multiball on it for more than 15 seconds. It cracks me up. I time it by the audio and jiggle the machine right as it kicks the first ball out.
 
Back
Top Bottom