FS Game: NAOMI Sega Ninja Assault kit - $100

mc300baud

Well-known member
Joined
Aug 26, 2006
Messages
3,763
Reaction score
101
Location
Tacoma, Washington
Rating - 100%
27   0   0
i have a full kit for Ninja Assault which includes the cart, NAOMI board, I/O board, video board, and audio amp board.

this kit would usually sell for more but there's a problem with either the main PCB or the I/O board that causes the game to default into a menu mode upon boot sometimes, but not always. i had this in a game on location and it bothered the location owner since he hated randomly flipping switches and pushing buttons to get it into play mode, which it would eventually do. i believe either the TEST or SERVICE switch on the main NAOMI pcb is also bad; shouldn't be hard to replace but i could get around it in my cab so i never bothered.

[yes, i did replace the battery and that did not take care of the issue. i also moved the new battery to a replacement board so you might have to pick up a 2032.]

*** other than booting into a menu mode sometimes the game works just fine ***

the video board and audio amp board both came from the replacement kit i bought; i did not get a chance to test them but they were sold to me working and look nice and clean. the main PCB, cart, and I/O board from the replacement kit have all functioned flawlessly.

with the main board this is a pretty large and heavy kit. i would do $100 + $25 shipping for everything, or $100 including shipping if you have your own NAOMI main board and just want the cart and sub-boards.

prices are good within the lower 48; i can ship elsewhere but shipping will likely be more expensive.
 
this is, AFAIK, the only NAOMI gun game that uses a standard setup with no extra sensors around the monitor. my cab uses regular Happ pistols and it works fine. looks like the originals were recoils.

it's NAOMI 1, i believe.

and yes, i'd go for a local pickup for $75, saving me the trouble to pack and ship.

ninjaassault.jpg


main board with cart, video board on top, audio amp board upper right, I/O board lower right. no cables, sorry.
 
Last edited:
Do you happen to know what cables i would need? Would i need a certain cable to power up the I/O? Also what do you mean "you may have to pick up a 2032"

I have a Naomi setup but this looks different...

Thanks
 
2032 = 3v battery.

i don't know the exact cables but they would not be too hard to piece together from scrap RCA & VGA + some connectors from Bob. i don't have a "standard" NAOMI setup so i can't compare the two directly.

a couple of people interested have ended up passing on this. Shou has dibs next but if he passes or doesn't reply soon i'm happy to entertain other offers. i'd do $75 without the main board (cart, I/O, audio + video boards.)
 
Back
Top Bottom