Nanao MS8 monitor killed with 240v

I have the MS8-26SU at .64 Ohm (H) and 42.6 (V) [0.45 mH (H) & 78.3 mH (V)]

I don't know of any drop in replacements, but I would check the transformer on the chassis ac line to see if it came open from the excess voltage.


Thanks, its for sure not open.


What's lame is how this worked for an hour+ after initially replacing the HOT and the Power Transistor. Guess it was its swan song.
 
maybe not open but an internal short could be changing the transformer ratio? is there an isolation transformer that also ran at 240v and maybe has a short and is outputting something wrong now?

weird that it worked for an hour
 
yep those pics above are of it running. It went blank and has fried two HOTs and two power transistors so its a goner.
 
Back
Top Bottom