Nanao MS8-26 wiring/quick disconnect

MmSadda

Well-known member
Joined
Mar 28, 2009
Messages
1,162
Reaction score
42
Location
Columbus, Ohio
I need to figure out which color wire goes to which pin on the connector that brings the image to the monitor on my Nanao MS8. Does anyone have a cab with a Nanao MS8, that they can take a picture of the lower part of the chassis of? Pretty much any early 90s/late 80s Sega cab would suffice, I'd bet.

See where the white 6-pin connector is (it SHOULD be 8-pin) with red, green, black, blue, yellow and white wires is in the pic below? I need to know which wire goes to which pin on a proper harness (I believe in a proper one, these are in fact, yellow wires with red, green, black, blue, and white stripes)

DSCF1177.jpg


Thanks,

Collin
 
Your picture is too blurry. What is the designator of that connector? I have schematics I can look up, as I took my Nanao to storage...
 
Back
Top Bottom