Nanao MS8-25 (FAN3) - R905 and R530 / Schematics

ataritoobin

Active member
Joined
Apr 16, 2005
Messages
1,946
Reaction score
21
Location
California
Hello-

Can anybody confirm the values of R905 and R530 on a Nanao MS8-25 FAN3? I suspect they'd be the same on any MS8-25 series chassis. Both of these on my chassis are crumbled and unreadable.

Does anybody happen to have schematics for the Nanao MS8-25? I can only seem to locate schematics for the 26 and 29 models, which appear to differ from this chassis (and are barely legible, though I understand that's about how good the originals are :().

The secondary fuse is blown, figure I'd check and replace some known-troublesome parts before powering itup.

I've already replaced Q533, Q901, C332 on neckboard, R903, R904 and the 2A 20mm fuse

C537 and C433 are not populated this particular chassis.

Thanks!
 
Hello-

Can anybody confirm the values of R905 and R530 on a Nanao MS8-25 FAN3? I suspect they'd be the same on any MS8-25 series chassis. Both of these on my chassis are crumbled and unreadable.

Does anybody happen to have schematics for the Nanao MS8-25? I can only seem to locate schematics for the 26 and 29 models, which appear to differ from this chassis (and are barely legible, though I understand that's about how good the originals are :().

The secondary fuse is blown, figure I'd check and replace some known-troublesome parts before powering itup.

I've already replaced Q533, Q901, C332 on neckboard, R903, R904 and the 2A 20mm fuse

C537 and C433 are not populated this particular chassis.

Thanks!


I can look at the schematics later. Did you replace the leaky cap next to the resistors?
 
Back
Top Bottom