nanao ms29

coinopjunkie

Member

Donor 2011
Joined
Dec 2, 2011
Messages
689
Reaction score
6
Location
Moreno Valley, California
Okay so I bought this monitor to go in my golden tee, It says it is a 100V monitor so I metered the voltage going to it and it reads 120V this is in the original game working my question is do I need a step down transformer or is 120V fine also it does not appear to need an isolation transformer is that correct or should I use one?
 
The MS9 Does not need an iso.

As for the input voltage, the BD901 regulator is designed for 100v, so you might need to step it down. But I'd check with Joey at http://www.jomac.net.au as he'd know for sure. I remember him telling me I could replace the voltage regulator on another 100v Nanao monitor with a different one and it would work with the 120 just fine, but I don't recall the specifics anymore...
 
Have not got a response

I have not got a response yet from him, however I looked in the owners manual for the monitor and it says "specified power supply 100-120V, 220-240V beam current:zero" with that being said I should be fine right?
 
Back
Top Bottom