Nanao ms 2932 : House of the Dead 2

Captain Locke

New member
Joined
Apr 17, 2015
Messages
52
Reaction score
1
Location
North Carolina
Worked fine for a while, then the vertical started spinning. Couldn't find a v-hold anywhere so I messed with the H-hold pot. This was able to make the spinning slower or faster, but never actually stopped. Tested the H-Hold pot, and it freely goes between 0 Ohms and 2k Ohms, so that seems to be working properly. I pulled out the chassis and reflowed all the major connectors and that did a whole heap of nothing. Reversed the vertical yokes because why not, and now it's in HV Shutdown. I didn't notice any blown fuses. =/

Does anyone have a parts list and/or schematics for this monitor? My google-fu has turned up nothing but more questions.

I'd like to start with a cap kit, because it needs one anyway, but I can't even find those.
 
i have the 2930,2931,2933 Cap kits and from what i see the 2932 isn't much different and the manual for it doesn't have a schematic nor a parts list.
 
Back
Top Bottom