Nanao 05B20085D1 For my crazy taxi

Markio

New member
Joined
Jun 29, 2008
Messages
192
Reaction score
1
Location
Ohio
Nanao 05B20085D1 For my crazy taxi *Does anyone know where I can get parts*

Ok I'm finally getting around to fixing my crazy taxi and I know for sure that the monitor is bad. The game played blind when I bought it and the original owner said the horizontal output transistor was bad. When I looked inside the board wasn't even hooked to the tube and the red and blue wire connector was burnt. This will be my first monitor repair so any help will be appreciated I'm assuming That I should go ahead and order a cap kit a HOT and and a new connector but I don't know where to get them could someone please help? Also if there is anything else that I need to do could you please let me know.

Thanks, Mark
 

Attachments

  • 100_5323.jpg
    100_5323.jpg
    83 KB · Views: 27
  • 100_5325.jpg
    100_5325.jpg
    86.2 KB · Views: 31
  • 100_5336.jpg
    100_5336.jpg
    96.8 KB · Views: 38
  • 100_5338.jpg
    100_5338.jpg
    81.3 KB · Views: 26
  • 100_5344.jpg
    100_5344.jpg
    92.5 KB · Views: 28
Last edited:
dude that yoke connector got smoked !!!!

as far as the hot, that isnt a issue to find..
id replace those male pins on the chassis that the yoke hooks up to.

ALso as far as the yoke connector goes id just cut one off of a donor yoke...
 
That's a good idea for the connector I'll see if I have something laying around. I'm really having a hard time finding any parts for this part number any ideas to help me search?
 
as far as???

just get the #m off the old hot and get one from bob roberts, digikey.com, mouser.com or ebay.com

if nobody can cough up male pins you could rob em off a donor chassis...

a old tv on the curb would make you a good parts donor right about now...
 
I can't find a cap kit or a hot! (man am I bad at searching the web)
The transistor says fmv-3gu and then under that it says 80 01
but I cant find anything and I dont have any paperwork on this monitor either

Thanks for all of your input so far Cadillacman
 
is there any other id on this chassis neckboard or monitor frame? Obiously its a nanao but id like to figure out what model it is so i can hunt for a manual.....
 
neckboard pcb-crt 05b20019b1

remote board pcb-vr 05b20085d1

frame u0087057 with a upc under it,I think its the serial #for the machine

it has a toshiba tube a68kju96x

That is all the other numbers and I don't know if it matters but it is a vga monitor
 
I have used several different search engines(google,yahoo,etc) with virtually no results does anyone know where I can get parts for this monitor?
 
Back
Top Bottom