Name that connector - Sega Sky Target

SilverDuck

New member
Joined
May 27, 2009
Messages
2,389
Reaction score
18
Location
Minnesota
This is the monitor connector inside my Sega Sky Target. Looks like it has the power, ground, RGB, SYNC, and the kitchen sink all in one black connector. Does anyone know what it's called, or where to find the matching connector?

4220042309_f1d59781e9_o.jpg

4220806308_fa8539506d_o.jpg

4220806242_2c8d9531dd_o.jpg


I bought the game without monitor....so I have no clue what was in it.
 
Ooh! I know what that is - it's a out of focus connector!

Hard to tell from the blurry photo, but it almost looks like a 15 position .062 Molex connector. But, again, that picture is terrible...

-Ian
 
I guess it don't matter, as I will just cut and install a new connector. I think I am putting a Nanao Ms8-26SU monitor in it, anyway.

The connector is a 15 position, with 9 wires going into it.

The colors are Red, Green, Blue, Blue/white, white on the top row. Middle row is Black, White, Empty, Red, and White/black.

So...other than the Red, Green, and Blue...any guesses as to the rest?

I assume blue/white and white are sync? Do I need both? On the middle row, I assume Black and White are AC Power, but what is Red and White/black?
 
Last edited:
Any guesses as to the wires in this plug?

I have the RGB figured out....and I think the BLACK and WHITE are the AC input...but what is the RED?
 
Last edited:
I can check the manual when I get home. These plugs don't usually have the power included. It's usually RGB Ground and Synch.
 
Thanks!...

The plug in question has square openings, not round like most molex connectors that I'm familiar with.

Also...I am pretty sure the power is included in this plug. If not power, what could all those other wires be?
 
Last edited:
Back
Top Bottom