Namco Rapid River wiring

t153

Member
Joined
Aug 28, 2009
Messages
192
Reaction score
1
Location
Zurich, Zurich, Switzerland
I have this rapid river boardset but the manual does not contain good schematics/wiring information on what to connect to the V187 ASCA-2B PCB board (Power/Steering/Video). Does anyone have (maybe from a working machine) more information on how to wire this up? I see 5 connectors (marked J203, J204, J205, J206, J207). Can anyone give me more help than the 'manual' ? Thanks.
 
I have this rapid river boardset but the manual does not contain good schematics/wiring information on what to connect to the V187 ASCA-2B PCB board (Power/Steering/Video). Does anyone have (maybe from a working machine) more information on how to wire this up? I see 5 connectors (marked J203, J204, J205, J206, J207). Can anyone give me more help than the 'manual' ? Thanks.

I have attached a picture to illustrate (in red) what I'm talking about. Maybe someone has more information about these connectors or could add pictures of his/their original machine?
 

Attachments

  • Rapid_V187.jpg
    Rapid_V187.jpg
    101.4 KB · Views: 17
Last edited:
Does your manual have any wiring at all ? My copy has wiring info
on the back which appears to be clear and easy enough to follow.

JD
 
Does your manual have any wiring at all ? My copy has wiring info
on the back which appears to be clear and easy enough to follow.

JD

I don't have a printed one. I found this for reference: http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/Rapid River.pdf
Sadly, on page 82 there is the 'SYSTEM PCB' shown but with no reference to any of these J20x-connectors I was asking for and if I go by the number of pins they don't match the picture of the board I've attached. If you could shed light on it, it would be much appreciated. Does your manual reference these connectors clearly enough? maybe it's just me looking at it wrong...
 
Last edited:
Back
Top Bottom