Namco pole position cockpit pinout ??

tatom

Member
Joined
Oct 26, 2011
Messages
360
Reaction score
2
Location
Oregon
Now that I know the Namco Pole Position pinouts are different from Atari does anyone have or know where I can find a Namco Pinout diagram? Thanks
 
You do realize that by running multiple threads on the same topic you've pretty much guaranteed that no one will help you....
 
I poked around the net a bit for it. The only real references I found about the Namco sp-219 manual being online were from several years ago. They said they were going to upload them to torrent sites. Might be worth a shot.
 
I have tried to delete the other posts and have not had any luck. How do I find this MAGIC DELETE BUTTON!!! The posts are actually different due to the fact that I found out after the first posts that the Namco board is Different from the Atari board so I did a new post referencing the Namco. Any help would be great.

First, delete is off the edit menu as I told you two posts earlier. Second, You didn't make 2 posts, you made FOUR. So after you recognized your mistake, you thought you would create a few some more just for good measure. Finally, after being notified you preceded to bump multiple threads.

Behave or be gone...
 
Last edited:
Ok I can delete Posts but I have no options to delete the THREADS. If you would stop being a A**HOLE and let me know if there is a way to delete THREADS this problem will be solved.

You can't delete threads, only mods can. But you can delete your posts, make a final comment indicating there was a duplicate post, etc. Or you can pay lip service to the aforementioned and try and keep all four threads running anyway. Since you have opted for the latter, don't expect a warm and fuzzy response.

As for your name calling, go pound sand. This isn't your first post and you didn't make one dupe post, you made THREE. So if calling out someone with no respect for others makes me an asshole, I'm ok with that...
 
Last edited:
I have done what you suggested and asked for the other 3 threads to be removed. I'm new here and I do not know the way things work yet. Thanks For your help.
 
Last edited:
Back
Top Bottom