You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
This one has been an interesting project for a good customer with deep pockets. He said spare no expense and wanted the thing to just be simply new looking. Everything worked but he over paid ($1800) on this heavily routed machine. It was swolen in a few areas and had heavy maze burn.
Its totally in acceptable condition considering its over 20 years old and they typically get a lot of maze burn... Missing marquee, CPO poorly worn, Lots of dings, Coin Door bars, scratched glass and a big blown front corner.
I big chip came out here on the inside of this corner because of the melamine and T-molding slot.
I decided to share my choices on parts here because I went over everything on the machine and visited everything down to the microswitch and front kick runner.
I will add everything in separate posts.
Im nearly done with this after like $1000 in parts including an Arcade SD Board.