LUCKYMAN
New member
Finnaly got done today putting the last thing i had to do to it and thats installing the new mat for the footstep. I wish i woulda took pics of it when i got it but i didnt. It was real dirty (coulndt see inside the bezel at all!). Didnt work. All it did was hum when you turned it on. No lights were working all lights and starters had to be replaced. Start button LED wss out had to get a new one of those. Replaced the joystick fire button bezel and the cap for the left handle as well. Speakers in periscope, both were blown, had to put 2 used 4.5 speakers in it. Had to get another GO5 to put into it (i plan to fix the other, i know the problem i just have to get around and fixing it).
Both PCBs had alot of problems. i sent them to andre at AMC soultions, he said alot of the roms were bad, he replaced them and there was still problems. Anyways got a good working set from road.runner (thanks mike!!!) Also installed a rebuilt AUDIO II regulator board. Totally cleand the power brick and inside.
coin door had alot of stuff missing. Coin acceptors, return coin slot covers. 25 cents papers. NOS atari logo sticker. Had repanit it and put new lock.
Both PCBs had alot of problems. i sent them to andre at AMC soultions, he said alot of the roms were bad, he replaced them and there was still problems. Anyways got a good working set from road.runner (thanks mike!!!) Also installed a rebuilt AUDIO II regulator board. Totally cleand the power brick and inside.
coin door had alot of stuff missing. Coin acceptors, return coin slot covers. 25 cents papers. NOS atari logo sticker. Had repanit it and put new lock.
Last edited:



