Museum of the Game® & International Arcade Museum® Forums

Okay, starting a new thread so my images/posts etc does not derail the feedback thread.

First, at least its here.

Its actually not in "bad" shape, and I think most of the issues could be "fixable". The game has definitely been restored and some parts were replaced.

Im happy to get this... there was some damage during shipping that was not in the photos STI sent me. The kickplate and the gouge at the bottom on the right hand side of the machine.

If there is anything to nitpick, no locks, coin mechs, cp wasnt locked down, tape deck was not secured< and the power cable is absolutely trashed, I dont dare to even plug it in until I replace that. I believe I have cord rated correctly I will just have to splice and connect to the molex. Missing a foot peg, but that could have happened in transit as well, but Ill be replacing all of those with new ones. Also, last but not least the entire bottom of the cabinet was replaced with sturdy plywood... so we will put that in the "plus" column.... if it needed rep[lacing and obviously it must have, I prefer finished plywood!

Ill post the pics here, Ill need a few posts to do it... then I will follow up as I replace and repair.