My heart broken-Raiden II sound stopped working

MadPerry

New member
Joined
Apr 8, 2010
Messages
205
Reaction score
0
Location
Rochester, New York
No idea why, but I turned on my Raiden II cab today and there is no longer any sound. I first connected it to my original Raiden pcb and it worked perfect. So that eliminated speakers, power supply, jamma connector, wires, etc.. Then I removed and checked capacitance on all 5 capacitors on the board. One of them was a little low so I replaced it. Checked for proper voltage on power supply. 12v, 5v, and -5v all there. -5 volt isn't even used. Noted the hum from the speaker increases/decreases appropriately with the volume potentiometer on the pcb.

Does anyone have any suggestions or experienced a similar problem? I'm sick about this because I got it from a fellow KLOV'er less than 2 weeks ago and it was working when it arrived.
 
Back
Top Bottom