My Funhouse has cut wires behind the mirror?

AE35

New member
Joined
Oct 20, 2009
Messages
314
Reaction score
0
Location
Copenhagen, Denmark
Hi!

I just removed the mystery mirror to check the bulbs, and removed the connector
(bottom of the picture)

But then I find these cut wires going nowhere obvious...for me at least:)

Can anyone fill me in??

Thanks:):)

fhcutwires.JPG
 
Look at the wire coloring and try to match it up with the switch or lamp matrix. Could also be just extra wires in the harness for something that was removed from the game during the initial stages of development.
 
Ok, thanks!

So, it's probably cost-cutting from when the game was going into production? Ok.

..I wonder it was:)
 
Red and Yellow - bulb in OPEN TRAPDOOR W/FLASHING sign
Blue/White & Green wire go to the ramp switch.The Blue/white connects to switch post closest to front of machine while the green wire goes to the middle post of the switch.
 
Hey Deadly thanks!

I looked and looked for where that switch and lamp was supposed to be!!!

And then I found out that my game IS MISSING THE GATE!!!

Omg, where do I find a new one??

I dont have this gate on my machine:

fungate.jpg



Thanks:)
 
Oh no, the complete thing is gone, trapdoor sign, bulb etc. There's nothing at the
ramp entrance!:)
 
Back
Top Bottom