My first pin!!! And what a deal!!

phatchit

Member
Joined
Feb 17, 2010
Messages
579
Reaction score
2
Location
Davenport, Florida
Just picked up a Ned and Teds Roadshow for $800!!! THe only thing that is wrong with it is the bulldozer isnt reconizing the points /hits.It moves up and down but doesnt count the hits? Ill post pics tommorrow but I am loving it ! What a fun pin.PEACE!!!
 
Last edited:
You mean a "Road Show" right ?

Congrats, sounds like a heck of a deal.
 
road show. that's awesome, dude...that's a $1500+ pin you got for half price. very nice.


post some pics.
 
Congrats on your score! And why that game is even a ~$1500 game is beyond me considering how it keeps falling into the #10 spot on IPDB. Every other freakin top 10 game is $2500 plus.
 
Just picked up a Ned and Teds Roadshow for $800!!! THe only thing that is wrong with it is the bulldozer isnt reconizing the points /hits.It moves up and down but doesnt count the hits? Ill post pics tommorrow but I am loving it ! What a fun pin.PEACE!!!

You can adjust the Eddy sensor under the playfield...that might bring back your bulldozer registration. You need those hits to advance through the week, collect your paycheck, and start Multiball.
 
adjusted the sensors and nothing.When i put it in test mode adn adjust the sensors they register I dont get it .Ive cleaned the sensors as well and still nothing .Any advice would be great!
 
I am so insanely jealous of you right now. I woulda snatched it up as well. That is my all time #1 favorite Pin. Friendfs and I started becoming regs at a local bar because of that game. My record is 11billion, was blind stinking nearly passout drunk and don't remember how the hell I did it, I just know the next day I had the record high and second was also mine at 6 billion.

Good memories definitely one of my grails. Goodluck with the dozer issue.
 
adjusted the sensors and nothing.When i put it in test mode adn adjust the sensors they register I dont get it .Ive cleaned the sensors as well and still nothing .Any advice would be great!

Hmm...are you sure you're adjusting the eddy sensor? It's a board under the playfield with a little pot that you can adjust. It can tell when the ball is above it...that's how the dozer registers "hits", not from any actual physical hit. I'm not sure how you would even clean it *confused* ...are you talking about the switches that detect the up/down movement of the dozer? That's a different thing entirely.
 
No i pulled the optic boards to see if there was gunk on them but were clean.The pots that I adjust are the right ones.When i put it in test mode adn adjust the pots to were the LED turns off adn then turn it up to where the light comes on the DMD screen shows that its registering but when I lower the playfield adn roll a ball over it nothing.Im lost?
 
FIgured it out!!!!! When I took the optic boards out to clean i put them in upside down, so the boards wouldnt recognize the ball .Go figure something so simple.I also adjusted the pots to where everything registers .Thanks again to all who gave there input.I could have not done it with out you.PEACE!!!!
 
FIgured it out!!!!! When I took the optic boards out to clean i put them in upside down, so the boards wouldnt recognize the ball .Go figure something so simple.I also adjusted the pots to where everything registers .Thanks again to all who gave there input.I could have not done it with out you.PEACE!!!!

Sweeeeet! Enjoy! Road Show is a super fun game, and when an awesome game is cheap - it makes it more fun for some reason. :)
 
Back
Top Bottom