My 19V2000 Blinks

thebman80

Well-known member
Joined
May 22, 2006
Messages
7,394
Reaction score
30
Location
Wallingford, Pennsylvania
I have done a lot of work on this thing over the years from cap kit to replacing all the Pots with fresh new ones. I have also gone over every single solder joint in the monitor. I have jumped the 2 large resistors on the main deflection PCB with wire. Plus I just dropped a new HV diode in the game today. Well soldered it in place and sealed it last night with the silicon and installed it today. After all this my monitor will still blink randomly not totally loosing the picture but the picture does shrink some and almost will blink off. Any Ideas short of replacing every component in the monitor or maybe the game PCB has issues? I really hope the tube itself isn't internally shorting.
 
Have you checked the harness connector? Mine had a similar issue that turned out to be cracked plastic on the harness connector.

Mitch
 
You mean the clips that hold the HV diode? Or the wire harnesses that plug on the the monitor? The HV diode is just soldered straight to the wire so that takes it out of the things that could be wrong I guess. I will have to check the wire harnesses I think there in good shape though.
 
Back
Top Bottom