MV-4F battery mod

super56k

Well-known member
Joined
Oct 16, 2010
Messages
1,071
Reaction score
100
Hello all. I just finished installing a cap kit in my second MV-4F and wanted to replace the original rechargeable battery with a coin cell holder and a CR2032. I did this mod on my MV-1F following a guide that stated what resister to remove to disable the charging circuit but I do not know what I need to do to disable the charging circuit on an MV-4F. Anyone know? I don't want my non-rechargeable battery to explode.
 
It's the same mod and same size resistor. I did this mod on a 6 board mound the holder under the board so the battery is easily replaced when it needs replacing.
 
It's the same mod and same size resistor. I did this mod on a 6 board mound the holder under the board so the battery is easily replaced when it needs replacing.

Thanks, so the 470 one?
 
Back
Top Bottom