pinjunky
Member
I am in for both.
MultiVector CPO/Marquee Signup list
- Thread starter shilmover
- Start date
khabbi
New member
I'm in for both.
thanks!
thanks!
OP
OP
shilmover
Well-known member
Just to clarify (as I had a couple of people ask). There is no set price yet as I am working on that. This list is just a "show of hands"
Current standing:
- Marquee: 20
- CPO: 22
Current standing:
- Marquee: 20
- CPO: 22
jfruge
New member
Ok so jut so I am up to speed. This new COP has a non space duel standard button spacing? more spread out to make it easyer to install the joysticks?
bheineck
Well-known member
jfruge
New member
In that case I would ne a new CP as well as the first CPS that were done were for the normal layout (what I have now)
Fun FUn,
tanio
Member
I am in interested in 1 CPO and 1 Marquee.
I prefer silkscreened for a higher cost.
I prefer silkscreened for a higher cost.
OP
OP
shilmover
Well-known member
OP
OP
shilmover
Well-known member
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet. 
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
Takeman
Well-known member
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
Sounds Good to me!
Ready when you are!
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
Takeman
Well-known member
Yes.The 2 button holes closest to the center on both sides of the panel needed to be moved in about .750" to allow the base of the stick to fit correctly. Otherwise you would have to "shave" or modify the joystick base on both sides so you clear the buttons. Basically making the stick base hourglass shaped. I did not want to offer something that would require the buyer to modify parts to install on it. Not everyone has the abillity or tools to do such a job. The moving of the buttons was the most logical.
That is the only modification done to Shimover's original layout.
Sounds great!!
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
I'm in... all the way!
I'm only gonna build one of these. No sense in pinching pennies now.
retroACTIVE
Active member
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
Alrighty then! Deal is sealed for me.... ready when you are!
joeycuda
Well-known member
That's a very small price difference for a large difference in quality/substance.
joeycuda
Well-known member
I'm in for 1 CPO and 1 marquee, especially for silk screened art. I probably wouldn't be interested in a translite type print instead of screened on plexi.
So, I'm thinking about building a Gravitar style cabinet just for a multivector cabinet, as I don't have a nice spare and don't want to convert my Space Duel. It's looking like it would have no sideart, so maybe I could make the cabinet completely black. Anyone else putting this project in a 'new' cabinet?
So, I'm thinking about building a Gravitar style cabinet just for a multivector cabinet, as I don't have a nice spare and don't want to convert my Space Duel. It's looking like it would have no sideart, so maybe I could make the cabinet completely black. Anyone else putting this project in a 'new' cabinet?
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
Awesome im in
jimk
Well-known member
I'm interested in 2 CPOs and possibly 2 Marquees depending on final design.
- Joined
- Feb 22, 2008
- Messages
- 8,889
- Reaction score
- 529
Update... I talked to Rich at TOG today. It looks like we are approaching the numbers for me to slikscreen these rather than inkjet. It also looks like the CPO will be around the $45-50 like I originally posted for inkjet.
As for the marquee, I should be able to have it silkscreened on Plexiglass rather than inkjet on a paper like material. I does, however mean two things:
- It would be more expensive ($30-35 rather than $25)
- It would be simplified a bit. the image of the asteroids would go away and it would be more "Vector".
It looks like there is sufficient demand for these as I would assume that nearly everone that buys a CP will buy at least a CPO. Depending on the comments I get to this post, I will start a FS thread for pre-orders to get the 25 minimum that I would need... If it falls through, I would refund all the money.
Thoughts?
I am happy with this
