2nd cabinet. Needs one more round of bondo and sanding. Then will also apply 1st coat. Too cold here, will have to give it time for 2nd coat on both. Bases still need a little bondo from when they were attached, and another coat of paint.
Multiple Nintendo VS. reconfiguration/refurbish
- Thread starter Mike29
- Start date
Thanks!
I appreciate the feedback. I will definetely send you PM. Right now I need one glass bezel, plastic triangle, new CPOs, plastic marquee verticle retainer, and 2 light gun cases (non-working okay, I have the guts) with clean holsters.
BazookaJoe
Member
Great project and good luck ! Ill be following !
Paint Question
I did a light scruff sand with 220 and it took off most of my first coat. I tried to be gentle. Is this normal since I am painting the laminate? I reapplied a first coat. Should I sand with something finer, or just apply second coat after 24 hours?
I did a light scruff sand with 220 and it took off most of my first coat. I tried to be gentle. Is this normal since I am painting the laminate? I reapplied a first coat. Should I sand with something finer, or just apply second coat after 24 hours?
Where is the grand finale?
