Multi Williams problem

kprodzin

New member
Joined
Feb 22, 2011
Messages
34
Reaction score
1
Location
Wisconsin
I have a clay multi williams game in a joust cabinet

Everything works great except joust won't start. It will go to attract screen and will go back to menu when I press 1P+2P together but won't let you start a game. All other games, controls work..

anyone have any ideas what to do on this.. I've reseated everything and check all connections...

any help would be appreciated..

thanks
kp
 
Have you checked to make sure it is set for free play? Otherwise, try coining it up and seeing if it will let you start a game.

ken
 
More info

OK plays with manually coining..

When I cleared scores on the other games the same happened.


when I try to get in the board settings menu it will only take me back to the clay setup screen and I can't access the board settings to make it free play again... that I can find out

but thats what happened, I reset joust in the past I guess and that is why joust didn't work..

I will probably just put in a credit switch

thanks for the help

kp
 
I don't have a Clay MW board, but there was a question like this a while ago. IIRC, you need to boot up into the game you want to adjust, then press the advance button to get into the bookkeeping mode (you can do it from the diagnostics screens, but yuou need to go all the way to the end). From the bookkeeping screen you press advance one more time to get to the adjustments page and you set freeplay there.

If somebody with a Clay MW can verify this or give the OP the right way to reset each game to free play....thanks.

ken
 
Back
Top Bottom