multi taito layout?

partygt

Active member
Joined
Apr 5, 2009
Messages
4,122
Reaction score
19
Location
California
i have a nice taito cab i may or may not sell on the fence. i was wondering about what this project would set me back? i have the cab jamma with working monitor see pics

what kind of layout for the cp is best for all the games?
does anyone have any artwork for this? sideart,bezel,marquee or cpo?

thanks for any help.
 

Attachments

  • IMG-20110425-00231.jpg
    IMG-20110425-00231.jpg
    91.7 KB · Views: 34
  • IMG-20110425-00230.jpg
    IMG-20110425-00230.jpg
    93.7 KB · Views: 30
  • IMG-20110425-00232.jpg
    IMG-20110425-00232.jpg
    92.9 KB · Views: 23
If your referring to just Standard JAMMA games, then it would be one joystick and 3 buttons for each player not including Player Start buttons.

If your asking about all the Taito games that were generally used in those style of cabinets? Then I'd say you probably couldn't do that as some use spinners, trackballs, joysticks, and a lot of odd configurations that would not allow for one to simply fit that all in one control panel of that size. Let along wiring them to all work properly for the game their used for.......

Plus some games are played vertically and others horizontally, as the taito monitor brackets allow for each configuration.
 
yes multi taito pcb

this is what i wanted to lay the cp out for multi taito as the cab is already jamma has anyone done one of these? pics? thx
 
Back
Top Bottom