multi board project - need advice, feedbac

silvereagle

Well-known member
Joined
May 28, 2007
Messages
2,900
Reaction score
499
Location
Innisfil, ON, Canada
I wanted to get some of your opinions on the following. I have been on the hunt for a Continental circuit cabinet for quite some time but due to the lack of room I am thinking of doing the following:

I have purchased all of the Continental internal parts in terms of wiring to get the board working and I am thinking of adding the board and wiring to my existing chase hq cabinet. So in essence, I would have two boards inside of one cabinet and would make it work so each game is independent from each other. Once switch turns the Chase on and the other switch turns on the Continental (The chase hq cab has plenty of room inside) The only problem is the monitor wiring. I don't know how I can tackle this, if even such a thing can be done. I hope you all understand what I am going.

Any comments or advice would be appreciated :)

Thanks in advance.
 
Multi JAMMA board with adapters for each game? You'd probably have to make a special harness for the wheel/pedals as well.
 
You could just double wire everything, and use a 3 position on/off switch. So you'd have two sets of a/c wires going to the switch, when one is turned on, it energizes the iso and a power supply which is hooked to the one board, when you flip the switch the other way it energizes the iso as well but only powers up the other power supply which is hooked to the other pcb. Voila!

Or you could just buy the multi jamma rig, yes. lol
 
3 position switch heh? I like that idea :)

Both boards are not jamma so the multi board idea will not work.

What about the monitor wiring though? Can I wire both connectors together?
 
Back
Top Bottom